/* bcal-nessie.c */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2010 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* bcal-nessie.h */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2010 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* bcal_cscipher.c */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2010 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* bcal_cscipher.h */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2010 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* bcal_khazad.c */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2011 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* bcal_khazad.h */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2008 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* cscipher.h */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2010 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* cscipher_sbox.h */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2010 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* keysize_descriptor.c */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2009 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* keysize_descriptor.h */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2009 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* khazad.c */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2006-2011 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* khazad.h */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2011 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* circularbytebuffer.c */
/*
- This file is part of the AVR-circularbuffer.
+ This file is part of the ARM-circularbytebuffer.
Copyright (C) 2009 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* circularbytebuffer.h */
/*
- This file is part of the AVR-circularbytebuffer.
+ This file is part of the ARM-circularbytebuffer.
Copyright (C) 2009 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* main-cscipher-test.c */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2008 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
/* main-khazad-test.c */
/*
- This file is part of the AVR-Crypto-Lib.
+ This file is part of the ARM-Crypto-Lib.
Copyright (C) 2011 Daniel Otte (daniel.otte@rub.de)
This program is free software: you can redistribute it and/or modify
+++ /dev/null
-/*
- This file is part of the AVR-uart_ni.
- Copyright (C) 2009 Daniel Otte (daniel.otte@rub.de)
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/* #include <util/setbaud.h> */
-/* we use a modifyed version of util/setbaud where the UL suffix is removed
- * since the preprocessor can not handle that.
- */
-
-#ifndef F_CPU
-# error "uart_i requires F_CPU to be defined"
-#endif
-
-#ifndef BAUD
-# error "uart_i requires UART0_BAUD_RATE to be defined"
-#endif
-
-#if !(F_CPU)
-# error "F_CPU must be a constant value"
-#endif
-
-#if !(BAUD)
-# error "UART0_BAUD_RATE must be a constant value"
-#endif
-
-#undef USE_2X
-
-/* Baud rate tolerance is 2 % unless previously defined */
-#ifndef BAUD_TOL
-# define BAUD_TOL 2
-#endif
-
-#define UBRR_VALUE (((F_CPU) + 8 * (BAUD)) / (16 * (BAUD)) -1)
-
-#if 100 * (F_CPU) > \
- (16 * ((UBRR_VALUE) + 1)) * (100 * (BAUD) + (BAUD) * (BAUD_TOL))
-# define USE_2X 1
-#elif 100 * (F_CPU) < \
- (16 * ((UBRR_VALUE) + 1)) * (100 * (BAUD) - (BAUD) * (BAUD_TOL))
-# define USE_2X 1
-#else
-# define USE_2X 0
-#endif
-
-#if USE_2X
-/* U2X required, recalculate */
-#undef UBRR_VALUE
-#define UBRR_VALUE (((F_CPU) + 4 * (BAUD)) / (8 * (BAUD)) -1)
-
-#if 100 * (F_CPU) > \
- (8 * ((UBRR_VALUE) + 1)) * (100 * (BAUD) + (BAUD) * (BAUD_TOL))
-# warning "Baud rate achieved is higher than allowed"
-#endif
-
-#if 100 * (F_CPU) < \
- (8 * ((UBRR_VALUE) + 1)) * (100 * (BAUD) - (BAUD) * (BAUD_TOL))
-# warning "Baud rate achieved is lower than allowed"
-#endif
-
-#endif /* USE_U2X */
-
-#ifdef UBRR_VALUE
-# define UBRRL_VALUE ((UBRR_VALUE) & 0xff)
-# define UBRRH_VALUE ((UBRR_VALUE) >> 8)
-#endif
-
+++ /dev/null
-/* uart_i.h */
-/*
- This file is part of the AVR-uart_ni.
- Copyright (C) 2009 Daniel Otte (daniel.otte@rub.de)
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-/**
- * \file uart_i.h
- * \email daniel.otte@rub.de
- * \author Daniel Otte
- * \date 2009-07-24
- * \license GPLv3 or later
- * \ingroup uart_i
- * \brief declaration for non-interrupt uart
- */
-
-#ifndef UART_I_H_
-#define UART_I_H_
-
-#include "config.h"
-#include "circularbytebuffer.h"
-#include <stdint.h>
-
-typedef struct{
- circularbytebuffer_t rxb;
- circularbytebuffer_t txb;
-#if UART0_HOOK
- void(*hook)(uint8_t);
- volatile uint8_t hook_running;
-#endif
-#if UART0_SWFLOWCTRL
- volatile uint8_t txon;
- volatile uint8_t rxon;
-#endif
-} uart0_ctx_t;
-
-
-typedef struct{
- circularbytebuffer_t rxb;
- circularbytebuffer_t txb;
-#if UART1_HOOK
- void(*hook)(uint8_t);
- volatile uint8_t hook_running;
-#endif
-#if UART1_SWFLOWCTRL
- volatile uint8_t txon;
- volatile uint8_t rxon;
-#endif
-} uart1_ctx_t;
-
-#if UART0_I
-
-/** \fn uart0_init(void)
- * \brief initialize uart0.
- * This function initializes the first uart according to the parameter specifyed
- * in config.h .
- */
-void uart0_init(void);
-
-/** \fn uart0_putc(uint16_t)
- * \brief send data through uart0.
- * This function sends data through the first uart
- * (the data size is debfined in config.h).
- * \param c data to send
- */
-void uart0_putc(uint16_t c);
-
-/** \fn uart0_getc(void)
- * \brief read data from uart0.
- * This function reads data from the first uart
- * (the data size is debfined in config.h).
- * \return data recived by uart0
- */
-uint16_t uart0_getc(void);
-
-/** \fn uart0_dataavail(void)
- * \brief checks if data is available.
- *
- * This function checks the state of the input buffer of uart0 and
- * returns if data is available or not.
- * \return zero if no data is available else a value different from zero is returned
- */
-uint8_t uart0_dataavail(void);
-
-#if UART0_HOOK
-void uart0_sethook(void(*fpt)(uint8_t));
-#endif
-
-
-#endif /* UART0_I */
-
-#if UART1_I
-/** \fn uart1_init(void)
- * \brief initialize uart1.
- * This function initializes the second uart according to the parameter specifyed
- * in config.h .
- */
-void uart1_init(void);
-
-/** \fn uart1_putc(uint16_t)
- * \brief send data through uart1.
- * This function sends data through the second uart
- * (the data size is debfined in config.h).
- * \param c data to send
- */
-void uart1_putc(uint16_t c);
-
-/** \fn uart1_getc(void)
- * \brief read data from uart1.
- * This function reads data from the second uart
- * (the data size is debfined in config.h).
- * \return data recived by uart1
- */
-uint16_t uart1_getc(void);
-
-/** \fn uart1_dataavail(void)
- * \brief checks if data is available.
- * This function checks the state of the input buffer of uart1 and
- * returns if data is available or not.
- * \return zero if no data is available else a value different from zero is returned
- */
-uint8_t uart1_dataavail(void);
-
-void uart0_sethook(void(*fpt)(uint8_t));
-#endif
-
-#endif /* UART_I_H_ */