X-Git-Url: https://git.cryptolib.org/?p=labortage2013badge.git;a=blobdiff_plain;f=firmware%2Fmain.c;h=f0fd1bf9b2d8f8e958d3326fb672a488eb9a14bc;hp=10183973c8b8b5a5552b3fa5df41f095339eaebf;hb=dcc28b118d8136e462aaece312c2f757b956f7ff;hpb=1a21d767bb3ed3f60bc0adcad521e3f8a91a458f diff --git a/firmware/main.c b/firmware/main.c index 1018397..f0fd1bf 100644 --- a/firmware/main.c +++ b/firmware/main.c @@ -34,7 +34,6 @@ different port or bit, change the macros below: #include "usbdrv.h" #include "oddebug.h" /* This is also an example for using debug macros */ #include "requests.h" /* The custom request numbers we use */ -#include "special_functions.h" #include "hotp.h" #if !SIMPLE_COUNTER #include "percnt2.h" @@ -51,38 +50,38 @@ different port or bit, change the macros below: #define STATE_NEXT 3 PROGMEM const char usbHidReportDescriptor[USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH] = { - 0x05, 0x01, // USAGE_PAGE (Generic Desktop) - 0x09, 0x06, // USAGE (Keyboard) - 0xa1, 0x01, // COLLECTION (Application) - 0x75, 0x01, // REPORT_SIZE (1) - 0x95, 0x08, // REPORT_COUNT (8) - 0x05, 0x07, // USAGE_PAGE (Keyboard)(Key Codes) - 0x19, 0xe0, // USAGE_MINIMUM (Keyboard LeftControl)(224) - 0x29, 0xe7, // USAGE_MAXIMUM (Keyboard Right GUI)(231) - 0x15, 0x00, // LOGICAL_MINIMUM (0) - 0x25, 0x01, // LOGICAL_MAXIMUM (1) - 0x81, 0x02, // INPUT (Data,Var,Abs) ; Modifier byte - 0x95, 0x01, // REPORT_COUNT (1) - 0x75, 0x08, // REPORT_SIZE (8) - 0x81, 0x03, // INPUT (Cnst,Var,Abs) ; Reserved byte - 0x95, 0x05, // REPORT_COUNT (5) - 0x75, 0x01, // REPORT_SIZE (1) - 0x05, 0x08, // USAGE_PAGE (LEDs) - 0x19, 0x01, // USAGE_MINIMUM (Num Lock) - 0x29, 0x05, // USAGE_MAXIMUM (Kana) - 0x91, 0x02, // OUTPUT (Data,Var,Abs) ; LED report - 0x95, 0x01, // REPORT_COUNT (1) - 0x75, 0x03, // REPORT_SIZE (3) - 0x91, 0x03, // OUTPUT (Cnst,Var,Abs) ; LED report padding - 0x95, 0x06, // REPORT_COUNT (6) - 0x75, 0x08, // REPORT_SIZE (8) - 0x15, 0x00, // LOGICAL_MINIMUM (0) - 0x25, 0x65, // LOGICAL_MAXIMUM (101) - 0x05, 0x07, // USAGE_PAGE (Keyboard)(Key Codes) - 0x19, 0x00, // USAGE_MINIMUM (Reserved (no event indicated))(0) - 0x29, 0x65, // USAGE_MAXIMUM (Keyboard Application)(101) - 0x81, 0x00, // INPUT (Data,Ary,Abs) - 0xc0 // END_COLLECTION + 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ + 0x09, 0x06, /* USAGE (Keyboard) */ + 0xa1, 0x01, /* COLLECTION (Application) */ + 0x75, 0x01, /* REPORT_SIZE (1) */ + 0x95, 0x08, /* REPORT_COUNT (8) */ + 0x05, 0x07, /* USAGE_PAGE (Keyboard)(Key Codes) */ + 0x19, 0xe0, /* USAGE_MINIMUM (Keyboard LeftControl)(224) */ + 0x29, 0xe7, /* USAGE_MAXIMUM (Keyboard Right GUI)(231) */ + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ + 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ + 0x81, 0x02, /* INPUT (Data,Var,Abs) ; Modifier byte */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x75, 0x08, /* REPORT_SIZE (8) */ + 0x81, 0x03, /* INPUT (Cnst,Var,Abs) ; Reserved byte */ + 0x95, 0x05, /* REPORT_COUNT (5) */ + 0x75, 0x01, /* REPORT_SIZE (1) */ + 0x05, 0x08, /* USAGE_PAGE (LEDs) */ + 0x19, 0x01, /* USAGE_MINIMUM (Num Lock) */ + 0x29, 0x05, /* USAGE_MAXIMUM (Kana) */ + 0x91, 0x02, /* OUTPUT (Data,Var,Abs) ; LED report */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x75, 0x03, /* REPORT_SIZE (3) */ + 0x91, 0x03, /* OUTPUT (Cnst,Var,Abs) ; LED report padding */ + 0x95, 0x06, /* REPORT_COUNT (6) */ + 0x75, 0x08, /* REPORT_SIZE (8) */ + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ + 0x25, 0x65, /* LOGICAL_MAXIMUM (101) */ + 0x05, 0x07, /* USAGE_PAGE (Keyboard)(Key Codes) */ + 0x19, 0x00, /* USAGE_MINIMUM (Reserved (no event indicated))(0) */ + 0x29, 0x65, /* USAGE_MAXIMUM (Keyboard Application)(101) */ + 0x81, 0x00, /* INPUT (Data,Ary,Abs) */ + 0xc0 /* END_COLLECTION */ }; static uint16_t secret_length_ee EEMEM = 0; @@ -108,7 +107,6 @@ static union __attribute__((packed)) { void* ptr[UNI_BUFFER_SIZE/sizeof(void*)]; } uni_buffer; -static uint8_t uni_buffer_fill; static uint8_t current_command; typedef struct { @@ -230,13 +228,6 @@ void buildReport(uchar send_key) { keyboard_report.modifier = 0; switch (send_key) { - case 'A' ... 'Z': - keyboard_report.modifier = MOD_SHIFT_LEFT; - keyboard_report.keycode[0] = KEY_A + (send_key-'A'); - break; - case 'a' ... 'z': - keyboard_report.keycode[0] = KEY_A + (send_key-'a'); - break; case '1' ... '9': keyboard_report.keycode[0] = KEY_1 + (send_key-'1'); break; @@ -261,41 +252,27 @@ int8_t button_get_debounced(volatile uint8_t debounce_count) { return v ? 0 : 1; } -static -void init_temperature_sensor(void){ - ADMUX = 0x8F; - ADCSRA = 0x87; -} - -static -uint16_t read_temperture_sensor(void){ - ADCSRA |= 0x40; - while(ADCSRA & 0x40) - ; - return ADC; -} - usbMsgLen_t usbFunctionSetup(uchar data[8]) { usbRequest_t *rq = (usbRequest_t *)data; if ((rq->bmRequestType & USBRQ_TYPE_MASK) == USBRQ_TYPE_CLASS) { /* class request type */ switch(rq->bRequest) { - case USBRQ_HID_GET_REPORT: // send "no keys pressed" if asked here - // wValue: ReportType (highbyte), ReportID (lowbyte) - usbMsgPtr = (void *)&keyboard_report; // we only have this one + case USBRQ_HID_GET_REPORT: /* send "no keys pressed" if asked here */ + /* wValue: ReportType (highbyte), ReportID (lowbyte) */ + usbMsgPtr = (void *)&keyboard_report; /* we only have this one */ keyboard_report.modifier = 0; keyboard_report.keycode[0] = 0; return sizeof(keyboard_report); - case USBRQ_HID_SET_REPORT: // if wLength == 1, should be LED state + case USBRQ_HID_SET_REPORT: /* if wLength == 1, should be LED state */ if (rq->wLength.word == 1) { current_command = LED_WRITE; return USB_NO_MSG; } return 0; - case USBRQ_HID_GET_IDLE: // send idle rate to PC as required by spec + case USBRQ_HID_GET_IDLE: /* send idle rate to PC as required by spec */ usbMsgPtr = &idleRate; return 1; - case USBRQ_HID_SET_IDLE: // save idle rate as required by spec + case USBRQ_HID_SET_IDLE: /* save idle rate as required by spec */ idleRate = rq->wValue.bytes[1]; return 0; } @@ -364,20 +341,6 @@ usbMsgLen_t usbFunctionSetup(uchar data[8]) usbMsgPtr = dbg_buffer; return len; } - case CUSTOM_RQ_READ_MEM: - usbMsgPtr = (uchar*)rq->wValue.word; - return rq->wLength.word; - case CUSTOM_RQ_WRITE_MEM: - case CUSTOM_RQ_EXEC_SPM: -/* uni_buffer_fill = 4; - uni_buffer.w16[0] = rq->wValue.word; - uni_buffer.w16[1] = rq->wLength.word; - return USB_NO_MSG; -*/ case CUSTOM_RQ_READ_FLASH: - uni_buffer.w16[0] = rq->wValue.word; - uni_buffer.w16[1] = rq->wLength.word; - uni_buffer_fill = 4; - return USB_NO_MSG; case CUSTOM_RQ_RESET: soft_reset((uint8_t)(rq->wValue.word)); break; @@ -385,10 +348,6 @@ usbMsgLen_t usbFunctionSetup(uchar data[8]) uni_buffer.w8[0] = button_get_debounced(25); usbMsgPtr = uni_buffer.w8; return 1; - case CUSTOM_RQ_READ_TMPSENS: - uni_buffer.w16[0] = read_temperture_sensor(); - usbMsgPtr = uni_buffer.w8; - return 2; } } @@ -403,7 +362,7 @@ uchar usbFunctionWrite(uchar *data, uchar len) case LED_WRITE: if (data[0] != LED_state) LED_state = data[0]; - return 1; // Data read, not expecting more + return 1; /* Data read, not expecting more */ case CUSTOM_RQ_SET_SECRET: { if (uni_buffer.w8[0] < (secret_length_b + 7) / 8) { @@ -422,46 +381,12 @@ uchar usbFunctionWrite(uchar *data, uchar len) } memcpy(dbg_buffer, data, len); return 1; - case CUSTOM_RQ_WRITE_MEM: - memcpy(uni_buffer.ptr[0], data, len); - uni_buffer.w16[0] += len; - return !(uni_buffer.w16[1] -= len); - case CUSTOM_RQ_EXEC_SPM: - if(uni_buffer_fill < 8){ - uint8_t l = 8 - uni_buffer_fill; - if(len 8) { - memcpy(uni_buffer.ptr[0], data, len); - uni_buffer.w16[0] += len; - return 0; - } else { - memcpy(&(uni_buffer.w8[uni_buffer_fill]), data, len); - exec_spm(uni_buffer.w16[2], uni_buffer.w16[3], uni_buffer.ptr[0], data, len); - return 1; - } default: return 1; } return 0; } uchar usbFunctionRead(uchar *data, uchar len){ - uchar ret = len; - switch(current_command){ - case CUSTOM_RQ_READ_FLASH: - while(len--){ - *data++ = pgm_read_byte((uni_buffer.w16[0])++); - } - return ret; - default: - break; - } return 0; } @@ -474,15 +399,15 @@ int x, optimumDev, targetValue = (unsigned)(1499 * (double)F_CPU / 10.5e /* do a binary search: */ do { OSCCAL = trialValue + step; - x = usbMeasureFrameLength(); // proportional to current real frequency - if(x < targetValue) // frequency still too low + x = usbMeasureFrameLength(); /* proportional to current real frequency */ + if(x < targetValue) /* frequency still too low */ trialValue += step; step >>= 1; } while(step > 0); /* We have a precision of +/- 1 for optimum OSCCAL here */ /* now do a neighborhood search for optimum value */ optimumValue = trialValue; - optimumDev = x; // this is certainly far away from optimum + optimumDev = x; /* this is certainly far away from optimum */ for (OSCCAL = trialValue - 1; OSCCAL <= trialValue + 1; OSCCAL++){ x = usbMeasureFrameLength() - targetValue; if (x < 0) @@ -498,11 +423,9 @@ int x, optimumDev, targetValue = (unsigned)(1499 * (double)F_CPU / 10.5e void usbEventResetReady(void) { - cli(); // usbMeasureFrameLength() counts CPU cycles, so disable interrupts. + cli(); /* usbMeasureFrameLength() counts CPU cycles, so disable interrupts. */ calibrateOscillator(); sei(); -// we never read the value from eeprom so this causes only degradation of eeprom -// eeprom_write_byte(0, OSCCAL); // store the calibrated value in EEPROM } /* ------------------------------------------------------------------------- */ @@ -523,7 +446,6 @@ int main(void) DDRB &= ~_BV(BUTTON_PIN); /* make button pin input */ PORTB |= _BV(BUTTON_PIN); /* turn on pull-up resistor */ - init_temperature_sensor(); counter_init(); usbInit(); usbDeviceDisconnect(); /* enforce re-enumeration, do this while interrupts are disabled! */ @@ -551,7 +473,7 @@ int main(void) switch(key_state) { case STATE_SEND_KEY: buildReport(token[idx]); - key_state = STATE_RELEASE_KEY; // release next + key_state = STATE_RELEASE_KEY; /* release next */ break; case STATE_RELEASE_KEY: buildReport(0); @@ -564,9 +486,9 @@ int main(void) } break; default: - key_state = STATE_WAIT; // should not happen + key_state = STATE_WAIT; /* should not happen */ } - // start sending + /* start sending */ usbSetInterrupt((void *)&keyboard_report, sizeof(keyboard_report)); }