X-Git-Url: https://git.cryptolib.org/?p=labortage2013badge.git;a=blobdiff_plain;f=firmware%2Fmain.c;h=75f5e463b1bab740845d80fb7d0cf0167366e713;hp=10183973c8b8b5a5552b3fa5df41f095339eaebf;hb=2f12eaa19fb0e91a4fc5cf4b8b8031d3c168fa61;hpb=1a21d767bb3ed3f60bc0adcad521e3f8a91a458f

diff --git a/firmware/main.c b/firmware/main.c
index 1018397..75f5e46 100644
--- a/firmware/main.c
+++ b/firmware/main.c
@@ -34,7 +34,6 @@ different port or bit, change the macros below:
 #include "usbdrv.h"
 #include "oddebug.h"        /* This is also an example for using debug macros */
 #include "requests.h"       /* The custom request numbers we use */
-#include "special_functions.h"
 #include "hotp.h"
 #if !SIMPLE_COUNTER
 #include "percnt2.h"
@@ -230,13 +229,6 @@ void buildReport(uchar send_key) {
     keyboard_report.modifier = 0;
 
     switch (send_key) {
-    case 'A' ... 'Z':
-        keyboard_report.modifier = MOD_SHIFT_LEFT;
-        keyboard_report.keycode[0] = KEY_A + (send_key-'A');
-        break;
-    case 'a' ... 'z':
-        keyboard_report.keycode[0] = KEY_A + (send_key-'a');
-        break;
     case '1' ... '9':
         keyboard_report.keycode[0] = KEY_1 + (send_key-'1');
         break;
@@ -261,20 +253,6 @@ int8_t button_get_debounced(volatile uint8_t debounce_count) {
     return v ? 0 : 1;
 }
 
-static
-void init_temperature_sensor(void){
-	ADMUX = 0x8F;
-	ADCSRA = 0x87;
-}
-
-static
-uint16_t read_temperture_sensor(void){
-	ADCSRA |= 0x40;
-	while(ADCSRA & 0x40)
-		;
-	return ADC;
-}
-
 usbMsgLen_t usbFunctionSetup(uchar data[8])
 {
 	usbRequest_t    *rq = (usbRequest_t *)data;
@@ -364,20 +342,6 @@ usbMsgLen_t usbFunctionSetup(uchar data[8])
 			usbMsgPtr = dbg_buffer;
 			return len;
 		}
-		case CUSTOM_RQ_READ_MEM:
-			usbMsgPtr = (uchar*)rq->wValue.word;
-			return rq->wLength.word;
-		case CUSTOM_RQ_WRITE_MEM:
-		case CUSTOM_RQ_EXEC_SPM:
-/*			uni_buffer_fill = 4;
-			uni_buffer.w16[0] = rq->wValue.word;
-			uni_buffer.w16[1] = rq->wLength.word;
-			return USB_NO_MSG;
-*/		case CUSTOM_RQ_READ_FLASH:
-			uni_buffer.w16[0] = rq->wValue.word;
-			uni_buffer.w16[1] = rq->wLength.word;
-            uni_buffer_fill = 4;
-			return USB_NO_MSG;
 		case CUSTOM_RQ_RESET:
 			soft_reset((uint8_t)(rq->wValue.word));
 			break;
@@ -385,10 +349,6 @@ usbMsgLen_t usbFunctionSetup(uchar data[8])
 			uni_buffer.w8[0] = button_get_debounced(25);
 			usbMsgPtr = uni_buffer.w8;
 			return 1;
-		case CUSTOM_RQ_READ_TMPSENS:
-			uni_buffer.w16[0] = read_temperture_sensor();
-			usbMsgPtr = uni_buffer.w8;
-			return 2;
 		}
     }
 
@@ -422,46 +382,12 @@ uchar usbFunctionWrite(uchar *data, uchar len)
 		}
 		memcpy(dbg_buffer, data, len);
 		return 1;
-	case CUSTOM_RQ_WRITE_MEM:
-		memcpy(uni_buffer.ptr[0], data, len);
-		uni_buffer.w16[0] += len;
-		return !(uni_buffer.w16[1] -= len);
-	case CUSTOM_RQ_EXEC_SPM:
-		if(uni_buffer_fill < 8){
-			uint8_t l = 8 - uni_buffer_fill;
-			if(len<l){
-				len = l;
-			}
-			memcpy(&(uni_buffer.w8[uni_buffer_fill]), data, len);
-			uni_buffer_fill += len;
-			return 0;
-		}
-		uni_buffer.w16[1] -= len;
-		if (uni_buffer.w16[1] > 8) {
-			memcpy(uni_buffer.ptr[0], data, len);
-			uni_buffer.w16[0] += len;
-			return 0;
-		} else {
-			memcpy(&(uni_buffer.w8[uni_buffer_fill]), data, len);
-			exec_spm(uni_buffer.w16[2], uni_buffer.w16[3], uni_buffer.ptr[0], data, len);
-			return 1;
-		}
 	default:
 		return 1;
 	}
 	return 0;
 }
 uchar usbFunctionRead(uchar *data, uchar len){
-	uchar ret = len;
-	switch(current_command){
-	case CUSTOM_RQ_READ_FLASH:
-		while(len--){
-			*data++ = pgm_read_byte((uni_buffer.w16[0])++);
-		}
-		return ret;
-	default:
-		break;
-	}
 	return 0;
 }
 
@@ -523,7 +449,6 @@ int main(void)
 
     DDRB &= ~_BV(BUTTON_PIN); /* make button pin input */
     PORTB |= _BV(BUTTON_PIN); /* turn on pull-up resistor */
-    init_temperature_sensor();
     counter_init();
     usbInit();
     usbDeviceDisconnect();  /* enforce re-enumeration, do this while interrupts are disabled! */