X-Git-Url: https://git.cryptolib.org/?a=blobdiff_plain;f=test_src%2Fuart_i-asm.S;h=ebd9663830dd757ed6788659fee40e35af2294d7;hb=d1181933dc28db92d787cf5604e2fc96ab0d8f9f;hp=8ce866b4280acf438146833d0f9f57b95d38a1e1;hpb=52ec168ece9d61bd9cb652235dfe8faee6232a11;p=avr-crypto-lib.git

diff --git a/test_src/uart_i-asm.S b/test_src/uart_i-asm.S
index 8ce866b..ebd9663 100644
--- a/test_src/uart_i-asm.S
+++ b/test_src/uart_i-asm.S
@@ -29,10 +29,28 @@
 #include <avr/io.h>
 #include "config.h"
 #include "avr-asm-macros.S"
+#include "uart_defs.h"
 
 #define XON_VALUE  0x11
 #define XOFF_VALUE 0x13
 
+#if UART0_I
+
+#ifndef UART0_PARATY
+# warning "UART0: using default paraty: 'none'"
+# define UART0_PARATY UART_PARATY_NONE
+#endif
+
+#ifndef UART0_STOPBITS
+# warning "UART0: using default ammount of stop bits: '1'"
+# define UART0_STOPBITS UART_STOPBITS_1
+#endif
+
+#ifndef UART0_DATABITS
+# warning "UART0: using default ammount of data bits: '8'"
+# define UART0_DATABITS UART_DATABITS_8
+#endif
+
 #ifdef UDR
 # define OLD_UART
 # ifdef UDR0
@@ -53,6 +71,25 @@
 # define RXC0   RXC
 # define TXB80  TXB8
 # define RXB80  RXB8
+# define U2X0   U2X
+# define UDRIE0 UDRIE
+# define RXCIE0 RXCIE
+#endif
+
+#ifdef USART0_RX_vect
+# define RX_ISR USART0_RX_vect
+#endif
+
+#ifdef USART_RXC_vect
+# define RX_ISR USART_RXC_vect
+#endif
+
+#ifdef USART0_UDRE_vect
+# define TX_ISR USART0_UDRE_vect
+#endif
+
+#ifdef USART_UDRE_vect
+# define TX_ISR USART_UDRE_vect
 #endif
 
 #define CBB_SIZE 10
@@ -138,7 +175,6 @@ uart0_init:
 	clr r25
 	ldi r22, lo8(uart0_ctx+UART0_CBB_RX_OFFSET)
 	ldi r23, hi8(uart0_ctx+UART0_CBB_RX_OFFSET)
-	ldi r24, UART0_RXBUFFER_SIZE
 	ldi r20, lo8(uart0_rxbuffer)
 	ldi r21, hi8(uart0_rxbuffer)
 	rcall circularbytebuffer_init2
@@ -146,7 +182,6 @@ uart0_init:
 	clr r25
 	ldi r22, lo8(uart0_ctx+UART0_CBB_TX_OFFSET)
 	ldi r23, hi8(uart0_ctx+UART0_CBB_TX_OFFSET)
-	ldi r24, UART0_TXBUFFER_SIZE
 	ldi r20, lo8(uart0_txbuffer)
 	ldi r21, hi8(uart0_txbuffer)
 	rcall circularbytebuffer_init2
@@ -165,7 +200,6 @@ uart0_init:
 	SET_BIT_IO UCSR0A, U2X0, r24
 #else
   	CLEAR_BIT_IO UCSR0A, U2X0, r24
-/*	             UCSR0A */
 #endif
 	ldi r24, (UART0_PARATY<<4)|(UART0_STOPBITS<<3)|((UART0_DATABITS&3)<<1)
 	STORE_IO UCSR0C, r24
@@ -192,11 +226,17 @@ uart0_init:
  *	}
  */ 
  
-.global USART0_UDRE_vect
-USART0_UDRE_vect:
-	push_range 21, 26
-	push_range 30, 31
+.global TX_ISR
+TX_ISR:
+	push r1
+	push r21
+	push r22
 	in r21, _SFR_IO_ADDR(SREG)
+	CLEAR_BIT_IO UCSR0B, UDRIE0, r22
+	sei
+	push_range 23, 27
+	push_range 30, 31
+	clr r1
 	ldi r24, lo8(uart0_ctx+UART0_CBB_TX_OFFSET)
 	ldi r25, hi8(uart0_ctx+UART0_CBB_TX_OFFSET)
 	rcall circularbytebuffer_get_fifo
@@ -214,11 +254,14 @@ USART0_UDRE_vect:
 	breq 30b
 #endif
 	STORE_IO UDR0, r24
+	SET_BIT_IO UCSR0B, UDRIE0, r22
 99:
+	ori r21, 0x80 /* set I bit */
 	out _SFR_IO_ADDR(SREG), r21
 	pop_range 30, 31
-	pop_range 21, 26
-	reti
+	pop_range 21, 27
+	pop r1
+	ret
 	
 /******************************************************************************/
 /*
@@ -251,8 +294,13 @@ uart0_putc:
 	ldi r26, lo8(uart0_ctx+UART0_CBB_TX_OFFSET)
 	ldi r27, hi8(uart0_ctx+UART0_CBB_TX_OFFSET)
 20:
+;	sei
 	movw r24, r26
+;	nop
+;	nop
+	cli
 	rcall circularbytebuffer_cnt
+	sei
 	cpi r24, UART0_TXBUFFER_SIZE
 	breq 20b
 	movw r22, r26
@@ -308,10 +356,12 @@ uart0_putc:
  *	}
  *
  */
- .global USART0_RX_vect
- USART0_RX_vect:
+ .global RX_ISR
+ RX_ISR:
+ 	push_range 0, 1
 	push_range 16, 31
-	in r21, _SFR_IO_ADDR(SREG)
+	in r16, _SFR_IO_ADDR(SREG)
+	clr r1
 	LOAD_IO r24, UDR0
 #if UART0_SWFLOWCTRL
 	ldi r26, lo8(uart0_ctx+UART0_TXON_OFFSET)
@@ -368,8 +418,8 @@ uart0_putc:
 	ldi r23, hi8(uart0_ctx+UART0_CBB_TX_OFFSET)
 	ldi r30, lo8(uart0_ctx+UART0_RXON_OFFSET)
 	ldi r31, hi8(uart0_ctx+UART0_RXON_OFFSET)
-	ld r21, Z
-	tst r21
+	ld r18, Z
+	tst r18
 	breq 60f
 	cpi r24, UART0_THRESH_HIGH+1
 	brlo 99f
@@ -387,8 +437,9 @@ uart0_putc:
 	SET_BIT_IO UCSR0B, UDRIE0, r24
 #endif /* UART0_SWFLOWCTRL */
 99:	
-	out _SFR_IO_ADDR(SREG), r21
+	out _SFR_IO_ADDR(SREG), r16
 	pop_range 16, 31
+	pop_range 0, 1
 	reti
 
 /******************************************************************************/
@@ -415,6 +466,7 @@ uart0_putc:
 	movw r24, r22
 	cli
 	rcall circularbytebuffer_get_fifo
+	clr r25
 	reti
 	
 /******************************************************************************/
@@ -445,3 +497,4 @@ uart0_sethook:
 	ret
 #endif
 	
+#endif /* UART0_I */